Introduction

This guide will help users be able to remove the backboard, as well as detach the motherboard, and finally remove the old speaker to be able to replace it with the new speaker.

Pièces

Aucune pièce nécessaire.

Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit. Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.
  • Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.

Ajouter un commentaire

Once  the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver. Once  the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.
  • Once the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.

Ajouter un commentaire

Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.
  • Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.

Ajouter un commentaire

In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers. In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.
  • In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.

Ajouter un commentaire

Use tweezers to remove wires from combs. Use tweezers to remove wires from combs.
  • Use tweezers to remove wires from combs.

Ajouter un commentaire

Use your tweezers to free wire from comb in order to free the motherboard.
  • Use your tweezers to free wire from comb in order to free the motherboard.

Ajouter un commentaire

Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.
  • Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.

Ajouter un commentaire

Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length. Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length. Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.
  • Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.

Ajouter un commentaire

Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers. Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.
  • Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sedina Cavcic

Membre depuis le 05/09/2014

371 Réputation

3 tutoriels rédigés

Équipe

USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014 Membre de l'équipe USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014

USFSM-STEWART-F14S1G1

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 148