Introduction
This guide will show how to replace the barrel heating element of your Conair Infiniti PRO Curling Iron. It requires the housing, power cord and motherboard to be removed beforehand.
Ce dont vous avez besoin
-
-
-
Heat up your soldering gun and desolder the red wire from the motherboard as shown.
-
-
Outil utilisé dans cette étape :Desoldering Pump$3.99
-
With your soldering gun, desolder the white wire from the motherboard as shown.
-
-
-
Remove the heating element mount. This will free up the heating element barrel for replacement.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.