Introduction

In order to replace any internal parts, you first need to take off the back panel of the hair dryer. This guide will show you how to do that.

Pièces

Aucune pièce nécessaire.

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
  • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

  • Hold the hair dryer by the handle so that the back panel faces up.

Ajouter un commentaire

Remove the two 15.875 mm Phillips #2 screws from the back panel. Remove the two 15.875 mm Phillips #2 screws from the back panel.
  • Remove the two 15.875 mm Phillips #2 screws from the back panel.

Ajouter un commentaire

Starting from where the cord attaches to the handle, pull apart the two plastic panels. Continue separating the back panel, working along the seam. With moderate force, completely remove the back panel from the hair dryer.
  • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

  • Continue separating the back panel, working along the seam.

  • With moderate force, completely remove the back panel from the hair dryer.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Timothy Lo

Membre depuis le 22/04/2014

863 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 10-58, Amido Spring 2014 Membre de l'équipe Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 9

30 derniers jours : 61

Total : 2,541