Introduction

If the volume/power control button on your Craig Electronics CMP773 tablet has quit working, this guide will demonstrate how to replace it with the correct tools. During this procedure, be especially careful not to let it fall out when snapping on and off the back cover.

Remove the two 3.2 mm PH000 screws near the charging port.
  • Remove the two 3.2 mm PH000 screws near the charging port.

Ajouter un commentaire

Pry the back cover from the device along bottom edge.
  • Pry the back cover from the device along bottom edge.

Ajouter un commentaire

Idées cadeaux pour la Fête des Pères
Mettons nos papas à l’honneur ainsi que nos mentors qui nous ont appris à réparer.
Idées cadeaux pour la Fête des Pères
Honorons ceux qui nous ont enseigné à réparer.
Continue prying along each edge of the device until back cover is free.
  • Continue prying along each edge of the device until back cover is free.

Ajouter un commentaire

On the back cover, find the location where the volume/power button is held.
  • On the back cover, find the location where the volume/power button is held.

  • The volume/power button is not held securely after back is removed so it may fall out of place while removing the back cover from the device.

Ajouter un commentaire

Remove the old button and replace it with the new one. Remove the old button and replace it with the new one.
  • Remove the old button and replace it with the new one.

Ajouter un commentaire

Conclusion

Once the above steps have been successfully competed, power on the device. Enjoy your newly replaced volume/power control button.

Jessie L Morris

Membre depuis le 26/03/2018

171 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S1-G5, Harley Spring 2018 Membre de l'équipe IUPUI, Team S1-G5, Harley Spring 2018

IUPUI-HARLEY-S18S1G5

6 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 25