Introduction

This guide will show you how to remove the front cover of your device. Use this guide to gain access to the button pad and LCD screen.

Pièces

Aucune pièce nécessaire.

Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.
  • Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

Ajouter un commentaire

Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.
  • Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

Ajouter un commentaire

Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen. When the cover has been lifted off the screen, use your hands to remove it from the device. The button pad may fall off when the cover is removed.
  • Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.

  • When the cover has been lifted off the screen, use your hands to remove it from the device.

  • The button pad may fall off when the cover is removed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gabriele Pregadio

Membre depuis le 17/04/2013

1 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 17-2, Regan Spring 2013 Membre de l'équipe Cal Poly, Team 17-2, Regan Spring 2013

CPSU-REGAN-S13S17G2

4 membres

8 tutoriels rédigés

Fantastic but does anyone know where I can get this part?

VegetaFlex4Fitness - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 246