Introduction

When everything is working as it should, the speaker produces nearly the same vibrations that the microphone originally recorded and encoded on a tape, CD or LP record.

Pièces

Aucune pièce nécessaire.

Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.
  • Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.

Ajouter un commentaire

Gently remove the back panel of the device being careful not to unplug any internal wires.
  • Gently remove the back panel of the device being careful not to unplug any internal wires.

Ajouter un commentaire

Using your Phillips head screwdriver, remove the 4 brass speaker screws.
  • Using your Phillips head screwdriver, remove the 4 brass speaker screws.

  • Be careful to not remove the speaker housing screws, which surround the speaker screws.

Ajouter un commentaire

Carefully pull the wires out of their connections from the back of the speaker.
  • Carefully pull the wires out of their connections from the back of the speaker.

  • Don't forget which wire goes with which connection!

Ajouter un commentaire

Conclusion

To reassemble, follow these instructions in reverse order. Then test by playing a tune. We suggest "Live at the Apollo" by James Brown.

MarkAnthony

Membre depuis le 22/09/2013

583 Réputation

5 tutoriels rédigés

Équipe

University of Maryland, Team 1-4, Gulbrandsen Fall 2013 Membre de l'équipe University of Maryland, Team 1-4, Gulbrandsen Fall 2013

UMD-GULBRANDSEN-F13S1G4

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 13

30 derniers jours : 44

Total : 1,381