Aller au contenu principal

DBPOWER RD-810 Top Cover Replacement

Ce dont vous avez besoin

  1. DBPOWER RD-810 Top Cover Replacement, Top Cover: étape 1, image 1 de 2 DBPOWER RD-810 Top Cover Replacement, Top Cover: étape 1, image 2 de 2
    • Make sure the projector is unplugged before starting

    • Place the projector upside down to access the screws on the bottom.

    • Remove the five 7mm long screws using a #3 Phillips screwdriver at least 2 inches long.

  2. DBPOWER RD-810 Top Cover Replacement: étape 2, image 1 de 1
    • Flip the projector over and then remove the cover by lifting it up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

John Russell

Membre depuis le 02/14/18

914 Réputation

9 tutoriels rédigés

Équipe

USF Tampa, Team S5-G3, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S5-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S5G3

3 membres

9 tutoriels rédigés

Un commentaire

Projector motherboard 8 10

7447647735

Shyam Pawar - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 172