Réparez vos affaires Communauté Boutique

Dell Alienware 18 Display Assembly Replacement

Introduction

In this guide, we will be showing you how to remove and replace the Display Assembly.

Ce dont vous avez besoin

  1. Dell Alienware 18 Display Assembly Replacement, Closing the Display: étape 1, image 1 de 1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin

    • Close the display and turn the computer over.

    Modifier

  2. Dell Alienware 18 Display Assembly Replacement, Remove the Screws: étape 2, image 1 de 1

    • Remove the screws that secure the display assembly to the computer base.

    Modifier

  3. Dell Alienware 18 Display Assembly Replacement, Open the Display: étape 3, image 1 de 1

    • Turn the computer over and open the display.

    Modifier

  4. Dell Alienware 18 Display Assembly Replacement, Disconnecting the Video-Card Connector: étape 4, image 1 de 1

    • Disconnect the video-card connector cable from its connector on the system board.

    Modifier

  5. Dell Alienware 18 Display Assembly Replacement, Disconnecting the Display Cable: étape 5, image 1 de 1

    • Pull the pull-tab to disconnect the display cable from its connector on the system board.

    Modifier

  6. Dell Alienware 18 Display Assembly Replacement, Disconnecting the LED-Logo Board Cable: étape 6, image 1 de 1

    • Disconnect the LED-logo board cable from its connector on the system board.

    Modifier

  8. Dell Alienware 18 Display Assembly Replacement, Disconnecting the Antenna Cables: étape 7, image 1 de 1
    Modifier

  9. Dell Alienware 18 Display Assembly Replacement, Removing the Cables: étape 8, image 1 de 1

    • Note the routing of the antenna cables, and then remove the cables from the routing guides on the computer base.

    Modifier

  10. Dell Alienware 18 Display Assembly Replacement, Remove the Screws: étape 9, image 1 de 1

    • Remove the screw that secures the routing guides to the computer base.

    Modifier

  11. Dell Alienware 18 Display Assembly Replacement, Lifting the Routing Guides: étape 10, image 1 de 1

    • Slide and lift the routing guides off the computer base.

    Modifier

  12. Dell Alienware 18 Display Assembly Replacement, Remove the Screws: étape 11, image 1 de 1

    • Remove the screws, on the display hinges, that secure the display assembly to the computer base.

    Modifier

  13. Dell Alienware 18 Display Assembly Replacement, Lifting the Display Assembly: étape 12, image 1 de 1

    • Move the display to a perpendicular position to the computer base, and then lift the display assembly off the computer.

    Modifier

  14. Dell Alienware 18 Display Assembly Replacement, Placing the Display Assembly: étape 13, image 1 de 1

    • Place the NEW display assembly in position and replace the screws, on the display hinges, that secure the display assembly to the computer base.

    Modifier

  15. Dell Alienware 18 Display Assembly Replacement, Replace the Screw: étape 14, image 1 de 1

    • Place the routing guides on the computer base and replace the screw that secures the routing guides to the computer base.

    Modifier

  16. Dell Alienware 18 Display Assembly Replacement, Route the Mini-card: étape 15, image 1 de 1

    • Route the Mini-Card antenna cables through the routing guides on the computer base.

    Modifier

  17. Dell Alienware 18 Display Assembly Replacement, Connecting the Display Cable: étape 16, image 1 de 1

    • Connect the Mini-Card antenna cables to the Mini-Card. See"Replacing the Wireless Mini-Card" on page 107.

    • Connect the display cable, video-card connector cable, and LED-logo board cable to the respective connectors on the system board.

    Modifier

  18. Dell Alienware 18 Display Assembly Replacement, Close the Display: étape 17, image 1 de 1

    • Close the display and turn the computer over.

    Modifier

  19. Dell Alienware 18 Display Assembly Replacement, Replace the Screws: étape 18, image 1 de 1

    • Replace the screws that secure the display assembly to the computer base.

    Modifier
Ligne d'arrivée

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

darrius

Membre depuis le 03/26/18

5 213 Réputation

30 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

RampUP America, Inc. Membre de l'équipe RampUP America, Inc.

Community

42 membres

1 985 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 695