Introduction

In this guide, we will show you how to remove and replace the Display Assembly.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

  • Using the pull-tab, pull the display cable to disconnect the display cable from the connector on the system board.

Ajouter un commentaire

Disconnect and peel off the video-card connector cable from the connector on the system board.
  • Disconnect and peel off the video-card connector cable from the connector on the system board.

Ajouter un commentaire

Disconnect the LED-logo board cable from the connector on the system board. Disconnect the LED-logo board cable from the connector on the system board.
  • Disconnect the LED-logo board cable from the connector on the system board.

Ajouter un commentaire

Close the display and turn the computer over.
  • Close the display and turn the computer over.

Ajouter un commentaire

Disconnect the antenna cables from the Mini-Card.
  • Disconnect the antenna cables from the Mini-Card.

  • Note the routing of the antenna cables, and then remove the cables from the routing guides on the computer base.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the four screws that secure the display assembly on the computer base.
  • Remove the four screws that secure the display assembly on the computer base.

Ajouter un commentaire

Turn the computer over and open the display.
  • Turn the computer over and open the display.

  • Note the routing of the display cable and LED -logo board cable, and then remove the cables from the routing guides on the palm-rest assembly.

Ajouter un commentaire

Remove the two screws, on the display hinges, that secure the display assembly to the computer base.
  • Remove the two screws, on the display hinges, that secure the display assembly to the computer base.

Ajouter un commentaire

  • Gently slide out the antenna cables through the slot on the computer base.

Ajouter un commentaire

Move the display to a perpendicular position to the computer base, and then lift the display assembly off the computer.
  • Move the display to a perpendicular position to the computer base, and then lift the display assembly off the computer.

Ajouter un commentaire

Place the NEW display assembly in position and replace the two screws, on the display hinges, that secure the display assembly to the computer base
  • Place the NEW display assembly in position and replace the two screws, on the display hinges, that secure the display assembly to the computer base

Ajouter un commentaire

Route the display cable and LED -logo board cable through the routing guides on the palm-rest assembly.
  • Route the display cable and LED -logo board cable through the routing guides on the palm-rest assembly.

Ajouter un commentaire

Connect the display cable, video-card connector cable, and LED-logo board cable to the respective connectors on the system board.
  • Connect the display cable, video-card connector cable, and LED-logo board cable to the respective connectors on the system board.

Ajouter un commentaire

Slide the Mini-Card antenna cables through the slot on the computer base.
  • Slide the Mini-Card antenna cables through the slot on the computer base.

Ajouter un commentaire

Close the display and turn the computer over.
  • Close the display and turn the computer over.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Teren Wallace

Membre depuis le 18/12/2017

40 077 Réputation

357 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

833 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 7

Total : 18