Introduction

In this guide, we will show you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in  Before You Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.
  • Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.

Ajouter un commentaire

Lift the hard-drive assembly out of the computer base.
  • Lift the hard-drive assembly out of the computer base.

Ajouter un commentaire

Idées cadeaux pour la Fête des Pères
Mettons nos papas à l’honneur ainsi que nos mentors qui nous ont appris à réparer.
Idées cadeaux pour la Fête des Pères
Honorons ceux qui nous ont enseigné à réparer.
Remove the four screws that secure the hard-drive bracket to the hard drive.
  • Remove the four screws that secure the hard-drive bracket to the hard drive.

Ajouter un commentaire

Lift the hard-drive bracket off the hard drive.
  • Lift the hard-drive bracket off the hard drive.

Ajouter un commentaire

Place the hard drive in the hard-drive bracket. Place the hard drive in the hard-drive bracket.
  • Place the hard drive in the hard-drive bracket.

Ajouter un commentaire

Replace the four screws that secure the hard-drive bracket to the hard drive.
  • Replace the four screws that secure the hard-drive bracket to the hard drive.

Ajouter un commentaire

Place the hard-drive assembly in the computer base.
  • Place the hard-drive assembly in the computer base.

Ajouter un commentaire

Replace the two screws that secure the hard-drive assembly to the computer base.
  • Replace the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Teren Wallace

Membre depuis le 18/12/2017

38 517 Réputation

346 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

822 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 8