Introduction
In this guide, we will show you how to remove and replace the Display Assembly.
Ce dont vous avez besoin
-
-
Disconnect the display cable from the connector on the system board.
-
-
-
Remove the two screws (one on each side) that secure the display assembly to the computer base.
-
-
-
-
Lift and remove the display assembly out of the computer base.
-
-
-
Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
-
-
-
Connect the display cable to the connector on the system board.
-
Presque terminé !
Ligne d'arrivée