Introduction

In this guide, we will show you how to remove and replace the Hard Drive.

WARNING: Before working inside your computer, read the safety information  that shipped with your computer. Follow the procedures in "Before You Begin".
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in "Before You Begin".

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

  • Remove the two screws that secure the hard-drive cover to the computer base.

Ajouter un commentaire

Pry out the hard-drive cover using your finger.
  • Pry out the hard-drive cover using your finger.

Ajouter un commentaire

Remove the two screws that secure the hard-drive assembly to the computer base.
  • Remove the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Pull the pull-tab on the hard-drive assembly towards the right to disconnect the hard-drive assembly from the system board connector.
  • Pull the pull-tab on the hard-drive assembly towards the right to disconnect the hard-drive assembly from the system board connector.

Ajouter un commentaire

Lift the hard-drive assembly out of the computer base.
  • Lift the hard-drive assembly out of the computer base.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the four screws that secure the hard drive to the hard-drive cage.
  • Remove the four screws that secure the hard drive to the hard-drive cage.

Ajouter un commentaire

Place the NEW hard drive in the hard-drive cage.
  • Place the NEW hard drive in the hard-drive cage.

Ajouter un commentaire

Replace the four screws that secure the hard drive to the hard-drive cage.
  • Replace the four screws that secure the hard drive to the hard-drive cage.

Ajouter un commentaire

Place the NEW hard-drive assembly in the computer base.
  • Place the NEW hard-drive assembly in the computer base.

Ajouter un commentaire

Slide and connect the hard-drive assembly to the system board connector.
  • Slide and connect the hard-drive assembly to the system board connector.

Ajouter un commentaire

Replace the two screws that secure the hard-drive assembly to the computer base.
  • Replace the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Align the tabs on the hard-drive cover with the slots on the computer base and snap the hard-drive cover into place.
  • Align the tabs on the hard-drive cover with the slots on the computer base and snap the hard-drive cover into place.

Ajouter un commentaire

Replace the two screws that secure the hard-drive cover to the computer base.
  • Replace the two screws that secure the hard-drive cover to the computer base.

Ajouter un commentaire

Ligne d'arrivée

Teren Wallace

Membre depuis le 18/12/2017

42 075 Réputation

381 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

857 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 2