Introduction

In this guide, we will show you how to remove and replace the Display Assembly.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the two screws from the computer base.

Ajouter un commentaire

Loosen the display cable grounding screw.
  • Loosen the display cable grounding screw.

Ajouter un commentaire

Disconnect the display cable from the connector on the system board.
  • Disconnect the display cable from the connector on the system board.

Ajouter un commentaire

Remove the four screws that secure  the display assembly to the computer  base.
  • Remove the four screws that secure the display assembly to the computer base.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Lift the display assembly off the computer base.
  • Lift the display assembly off the computer base.

Ajouter un commentaire

Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.
  • Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

Ajouter un commentaire

Route the display cable and Mini-Card antenna cables through the routing  guides.
  • Route the display cable and Mini-Card antenna cables through the routing guides.

Ajouter un commentaire

Connect the display cable to the  connector on the system board.
  • Connect the display cable to the connector on the system board.

Ajouter un commentaire

Tighten the display cable grounding screw.
  • Tighten the display cable grounding screw.

Ajouter un commentaire

Replace the two screws at the bottom of the computer.
  • Replace the two screws at the bottom of the computer.

Ajouter un commentaire

Ligne d'arrivée

Teren Wallace

Membre depuis le 18/12/2017

42 075 Réputation

381 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

857 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 7