Introduction

Pretty straight forward repair. Biggest issue I found while doing it, is that spring clip that holds the screw to the cover. It does have a tendency to come off during the removal of the cover. It could theoretical fall into the opening of the drive bay. Make sure you know where it is so that it does not get lost.

Here is a Dell Inspiron 14z N411z with a defective hard drive. On the back side is only one cover for the hard drive as well as the memory module. Remove the Phillips screw on the bottom right corner of the cover.
  • Here is a Dell Inspiron 14z N411z with a defective hard drive.

  • On the back side is only one cover for the hard drive as well as the memory module.

  • Remove the Phillips screw on the bottom right corner of the cover.

Ajouter un commentaire

Use a plastic opening tool to unsnap the cover from the back case. Move the tool gently along the corner of the cover. The screw that holds the cover on, has a spring clip that keeps the screw attached to the cover. during removal of the screw, this clip might come off.
  • Use a plastic opening tool to unsnap the cover from the back case.

  • Move the tool gently along the corner of the cover.

  • The screw that holds the cover on, has a spring clip that keeps the screw attached to the cover. during removal of the screw, this clip might come off.

Ajouter un commentaire

With the removal of the cover, the hard drive is immediately visible. Remove the four screws securing the hard drive bracket. Slide the hard drive to the opposite end of the connector. This will free the connection. Slide the hard drive to the opposite end of the connector. This will free the connection.
  • With the removal of the cover, the hard drive is immediately visible. Remove the four screws securing the hard drive bracket.

  • Slide the hard drive to the opposite end of the connector. This will free the connection.

Ajouter un commentaire

Pull gently on the black tab on the hard drive. This will remove the drive and caddy from the computer. Remove the two Phillips screws on the right side, and the two Phillips screws on the left side.
  • Pull gently on the black tab on the hard drive. This will remove the drive and caddy from the computer.

  • Remove the two Phillips screws on the right side,

  • and the two Phillips screws on the left side.

Ajouter un commentaire

The hard drive is now removed from the caddy and the replacement can be installed.
  • The hard drive is now removed from the caddy and the replacement can be installed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

oldturkey03

Membre depuis le 29/09/2010

517 195 Réputation

120 tutoriels rédigés

Équipe

OTS Membre de l'équipe OTS

Business

1 membre

120 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 30

Total : 12,280