Introduction

Over time, a laptop's CMOS battery will stop holding it's charge and eventually die out. This guide will show how to remove and replace the CMOS battery of the device.

Pièces

Aucune pièce nécessaire.

Remove the two 6.5 mm PH1 Philips head screws on the back panel. Lift up the small panel from the top, using the plastic opening tools if necessary. Lift up the small panel from the top, using the plastic opening tools if necessary.
  • Remove the two 6.5 mm PH1 Philips head screws on the back panel.

  • Lift up the small panel from the top, using the plastic opening tools if necessary.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the CMOS battery with the plastic opening tools. Be careful while prying it open, the battery holder can break if you use too much force.
  • Remove the CMOS battery with the plastic opening tools.

  • Be careful while prying it open, the battery holder can break if you use too much force.

  • Do not use metal tools when touching anything that can have an electric charge.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christopher Meninno

Membre depuis le 20/03/2018

269 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S5-G3, Peak Spring 2018 Membre de l'équipe UMass Dartmouth, Team S5-G3, Peak Spring 2018

UMASSD-PEAK-S18S5G3

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 35