Turn the laptop over to where the battery is facing upwards and towards you.
  • Turn the laptop over to where the battery is facing upwards and towards you.

  • Locate the release tabs located on either side of the battery.

  • Push the release tabs toward the center of the device.

  • Remove the battery.

Ajouter un commentaire

Take the replacement battery, insert it into the original position  in the laptop.
  • Take the replacement battery, insert it into the original position in the laptop.

  • Slide the release tabs back into place.

Ajouter un commentaire

Remove the two countersunk keyboard screws using the Phillips #00 screwdriver
  • Remove the two countersunk keyboard screws using the Phillips #00 screwdriver

  • Battery removal is not necessary for keyboard removal.

Ajouter un commentaire

Lift up the keyboard using your fingers or a plastic opening tool
  • Lift up the keyboard using your fingers or a plastic opening tool

  • Do not not tear the ribbon cable hidden behind the keyboard

  • Disconnect the cable by sliding the connector ears outward

Ajouter un commentaire

After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing
  • After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing

  • Depending on your model, there could still be some hidden screws on the bottom case of the laptop that hold the palm-rest in place.

Ajouter un commentaire

Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.
  • Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.

Ajouter un commentaire

There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.
  • There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.

  • NOTE: Keep track of where you put the screws after you remove them. Keep screws of the same size together and away from screws of different sizes.

Ajouter un commentaire

There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.
  • There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Kyle Beekman

Membre depuis le 05/04/2012

141 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 14-10, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 14-10, Forte Spring 2012

CPSU-FORTE-S12S14G10

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,193