Make sure laptop is powered off before  removing the battery. Slide both arrow tabs towards the outer edge of the computer to release the battery.
  • Make sure laptop is powered off before removing the battery.

  • Slide both arrow tabs towards the outer edge of the computer to release the battery.

  • Note: battery is not shown.

Ajouter un commentaire

Remove Keyboard retaining screw from bottom of laptop.
  • Remove Keyboard retaining screw from bottom of laptop.

Ajouter un commentaire

Insert the 6 inch metal ruler, or another flat object into the holes in the top left of the keyboard, the top middle of the keyboard, and the top right of the keyboard to release the keyboard from the computer. There are a number of screws on the bottom that required to be removed prior to the keyboard being able to be lifted up. There are a number of screws on the bottom that required to be removed prior to the keyboard being able to be lifted up.
  • Insert the 6 inch metal ruler, or another flat object into the holes in the top left of the keyboard, the top middle of the keyboard, and the top right of the keyboard to release the keyboard from the computer.

  • There are a number of screws on the bottom that required to be removed prior to the keyboard being able to be lifted up.

"There are a number of screws on the bottom that required to be removed prior"

That's a very unhelpful step! What are they and which ones?!? I'm following two YouTube videos that show this stage and both have a single screw that holds the keyboard im place which my N5010 simply doesn't have. So my keyboard is held in place and I can't lift it.

Melvyn Mildiner - Réponse

Melvyn, I agree. This not up to iFixit's standards.

David Maag - Réponse

I have only discovered one screw that releases the keyboard. It is under the RAM access panel

David Maag - Réponse

Lift the keyboard up slightly and push forward in order to release bottom tabs.
  • Lift the keyboard up slightly and push forward in order to release bottom tabs.

Ajouter un commentaire

Pull the black tab up and then pull left on keyboard plug to release keyboard.
  • Pull the black tab up and then pull left on keyboard plug to release keyboard.

Ajouter un commentaire

Flip the laptop, so the bottom of the laptop is facing up.
  • Flip the laptop, so the bottom of the laptop is facing up.

  • Remove the seven 6.0mm Phillip #000 screws indicated using the Phillips #000 screwdriver.

Ajouter un commentaire

Flip the laptop back over, so that the top of the laptop is facing up. Open the laptop.
  • Flip the laptop back over, so that the top of the laptop is facing up.

  • Open the laptop.

  • Remove all of the indicated 6.0 mm screws with the Phillips #000 screwdriver.

Ajouter un commentaire

Unplug the palm rest cables by lifting the black tab up and then pulling on the blue tabs.
  • Unplug the palm rest cables by lifting the black tab up and then pulling on the blue tabs.

Ajouter un commentaire

Carefully unsnap and remove the palm rest. Place your fingers inside the large circle in the lower right corner to get a good grip. Place your fingers inside the large circle in the lower right corner to get a good grip.
  • Carefully unsnap and remove the palm rest.

  • Place your fingers inside the large circle in the lower right corner to get a good grip.

Ajouter un commentaire

Flip the laptop over to its backside.
  • Flip the laptop over to its backside.

  • Using the Phillips #000 Screwdriver remove the six indicated 6.0mm Phillips #000 screws.

Ajouter un commentaire

Flip the laptop over to its front side and open the laptop.
  • Flip the laptop over to its front side and open the laptop.

  • Remove the four 6.0mm Phillips #000 screws holding the screen to the base of the laptop using a Phillips #000 Screwdriver.

Ajouter un commentaire

Pull up both the black and white chords to completely detach the screen. Pull up both the black and white chords to completely detach the screen.
  • Pull up both the black and white chords to completely detach the screen.

Ajouter un commentaire

Lift the screen from the base of the laptop. Lift the screen from the base of the laptop.
  • Lift the screen from the base of the laptop.

Ajouter un commentaire

Use a spudger to separate and remove the plastic frame on the front of the screen. Use a spudger to separate and remove the plastic frame on the front of the screen.
  • Use a spudger to separate and remove the plastic frame on the front of the screen.

Ajouter un commentaire

Use a Phillips #000 Screwdriver to remove the 8 6.0mm Phillips #000 screws marked in the image. Use a Phillips #000 Screwdriver to remove the 8 6.0mm Phillips #000 screws marked in the image.
  • Use a Phillips #000 Screwdriver to remove the 8 6.0mm Phillips #000 screws marked in the image.

Ajouter un commentaire

Lift LCD screen from the plastic frame.
  • Lift LCD screen from the plastic frame.

Ajouter un commentaire

Flip LCD screen over to view the backside. Lift brown tab in the middle of the screen and pull to remove the entire piece. Lift brown tab in the middle of the screen and pull to remove the entire piece.
  • Flip LCD screen over to view the backside.

  • Lift brown tab in the middle of the screen and pull to remove the entire piece.

Ajouter un commentaire

Use a Phillips #000 Screwdriver to remove the four screws indicated (two on each side). Pull metal frames away from LCD screen.
  • Use a Phillips #000 Screwdriver to remove the four screws indicated (two on each side).

  • Pull metal frames away from LCD screen.

  • The metal frame on each side is pulled away separately, so make sure to make note of which side each one came from.

Ajouter un commentaire

Using a Phillips #000 Screwdriver, remove the indicated 6.0 mm screw on the left side of the camera. Pull the tab and release the ribbon on the right side of the camera.
  • Using a Phillips #000 Screwdriver, remove the indicated 6.0 mm screw on the left side of the camera.

  • Pull the tab and release the ribbon on the right side of the camera.

  • Pull the camera away from the plastic frame.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

April Poucher

Membre depuis le 13/10/2014

1 149 Réputation

10 tutoriels rédigés

Équipe

Clemson, Team 1-5, Benson Fall 2014 Membre de l'équipe Clemson, Team 1-5, Benson Fall 2014

CLEM-BENSON-F14S1G5

4 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 107