Introduction

The screen to a device may break due to an accident or suddenly stop to function. If the rest of the laptop is fine and is able to function, the screen can be replaced to restore the laptop to working order. During the replacing process, try to avoid touching any 'do not touch' area's of the replacement screen. This may damage the new screen and another replacement may be needed if so.

Remove the 4 small circle dots from the borders of the laptop screen. Simply pull the dots out of their sockets. Also remove the one longer rubber piece from the top of the screen. Simply peel the rubber piece from its place. Also remove the one longer rubber piece from the top of the screen. Simply peel the rubber piece from its place.
  • Remove the 4 small circle dots from the borders of the laptop screen. Simply pull the dots out of their sockets.

  • Also remove the one longer rubber piece from the top of the screen. Simply peel the rubber piece from its place.

Ajouter un commentaire

Unscrew and remove the 6  6mm screws that were under the rubber pieces using a Phillips #1. If the screws will not come out easily, use the magnetic bit to remove the screws all illustrated. If the screws will not come out easily, use the magnetic bit to remove the screws all illustrated.
  • Unscrew and remove the 6 6mm screws that were under the rubber pieces using a Phillips #1.

  • If the screws will not come out easily, use the magnetic bit to remove the screws all illustrated.

Ajouter un commentaire

Use the spudger to pry the plastic border off. Be sure that the plastic notch at the bottom of the screen is pulled out correctly. Pull the border to the left of the screen and out. Be sure that the plastic notch at the bottom of the screen is pulled out correctly. Pull the border to the left of the screen and out.
  • Use the spudger to pry the plastic border off.

  • Be sure that the plastic notch at the bottom of the screen is pulled out correctly. Pull the border to the left of the screen and out.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Unscrew the 8 6mm screws located on the outer border of the screen using a Phillips #1.
  • Unscrew the 8 6mm screws located on the outer border of the screen using a Phillips #1.

  • There are 4 screws on each side.

Ajouter un commentaire

Use the spudger to pry the screen up.
  • Use the spudger to pry the screen up.

Ajouter un commentaire

Lift the screen up and fold over gently. Lift the screen up and fold over gently. Lift the screen up and fold over gently.
  • Lift the screen up and fold over gently.

Ajouter un commentaire

Pull on the blue tag sticking out at the bottom of the screen and disconnect the wire. Pull on the blue tag sticking out at the bottom of the screen and disconnect the wire.
  • Pull on the blue tag sticking out at the bottom of the screen and disconnect the wire.

Ajouter un commentaire

Towards the top of the screen on the back, unplug the “this side up” wire. This can be done by squeezing the 2 metal side clips of the wire. This could be difficult so wiggling the wire a little bit may be necessary.
  • Towards the top of the screen on the back, unplug the “this side up” wire.

  • This can be done by squeezing the 2 metal side clips of the wire.

  • This could be difficult so wiggling the wire a little bit may be necessary.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kyle Cabral

Membre depuis le 19/03/2018

483 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G6, Bernier Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G6, Bernier Spring 2018

UMASSD-BERNIER-S18S2G6

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 35