Introduction

Looking to replace your original CPU with faster yet compatible one? Or are you just replacing a faulty one? This guide will walk you through replacing your existing CPU with a newer one.

Pièces

Aucune pièce nécessaire.

Make sure to shut down the computer! you can do this by going to the start menu and clicking shutdown.
  • Make sure to shut down the computer! you can do this by going to the start menu and clicking shutdown.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Ajouter un commentaire

Lay the computer on its side; you will see a blue knob. Turn said knob 90 degrees counter clockwise.
  • Lay the computer on its side; you will see a blue knob. Turn said knob 90 degrees counter clockwise.

Ajouter un commentaire

Slide the panel case forward about 1/2 inch while knob is turned.
  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Ajouter un commentaire

Remove the blue shield by sliding it straight upwards. Remove the blue shield by sliding it straight upwards.
  • Remove the blue shield by sliding it straight upwards.

Ajouter un commentaire

Pull back on the tab nearest to the front case fan. Slide the CPU heat sink from under the clip and pull upward. You may need to twist the CPU heat sink side to side to free it from the thermal paste.
  • Pull back on the tab nearest to the front case fan.

  • Slide the CPU heat sink from under the clip and pull upward.

  • You may need to twist the CPU heat sink side to side to free it from the thermal paste.

Ajouter un commentaire

Ground yourself before removing any internal components. Push release lever down slightly and away from CPU.
  • Ground yourself before removing any internal components.

  • Push release lever down slightly and away from CPU.

Ajouter un commentaire

Lift and rotate processor cover off of CPU. Processor cover will remain attached.
  • Lift and rotate processor cover off of CPU.

  • Processor cover will remain attached.

Ajouter un commentaire

Using two fingers holding the sides, lift the CPU from the socket.
  • Using two fingers holding the sides, lift the CPU from the socket.

  • Do not touch the underside of the CPU or any of the pins.

  • When replacing the CPU, do not use excessive force.

  • Ensure to use the alignment-notches on the new CPU, when replacing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

donnavon

Membre depuis le 02/09/2014

707 Réputation

7 tutoriels rédigés

Équipe

Pasco Hernando, Team 1-1, Prince Fall 2014 Membre de l'équipe Pasco Hernando, Team 1-1, Prince Fall 2014

PHSC-PRINCE-F14S1G1

11 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 13

Total : 1,190