Introduction

Replace the Heat Sink on the Motherboard to maintain optimal performance

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Ajouter un commentaire

Lay the computer on its side; you will see a blue knob. Turn this knob 90 deg clockwise.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Ajouter un commentaire

Slide the panel case forward about 1/2 inch while knob is turned. Lift panel case off computer.
  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Ajouter un commentaire

Remove the large blue cover from the computer, there are no screws or tabs keeping it in place. Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.
  • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

Ajouter un commentaire

Press down on the release tab above the heat sink. Press down on the release tab above the heat sink.
  • Press down on the release tab above the heat sink.

Ajouter un commentaire

Pull the heat sink out of the computer while pressing on the release tab. When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor
  • Pull the heat sink out of the computer while pressing on the release tab.

  • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Tom

Membre depuis le 04/10/2010

799 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 22-4, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 membres

13 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 13

Total : 5,394