Aller au contenu principal

Dell Precision 5520 Memory Module Replacement

Ce dont vous avez besoin

  1. Dell Precision 5520 Memory Module Replacement, Base Cover: étape 1, image 1 de 2 Dell Precision 5520 Memory Module Replacement, Base Cover: étape 1, image 2 de 2
    • Be sure to power off and unplug your device before you begin your repair.

    • Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

    • Pry the edges of the base cover and lift it to remove it from the computer.

    • NOTE: Use a Torx #5 screwdriver for the base screws and a Phillips screwdriver for the two M2x8 screws inside the badge flap.

  2. Dell Precision 5520 Memory Module Replacement, Battery: étape 2, image 1 de 1
    • Disconnect the battery cable from the system board [1].

    • Remove the seven M2x4 screws that secure the battery to the computer [2].

    • Lift the battery off the computer [3].

    • Do not apply pressure to the surface of the battery

    • Do not bend

    • Do not use tools of any kind to pry on or against the battery

    • If a battery cannot be removed within the constraints above, please contact Dell technical support

  3. Dell Precision 5520 Memory Module Replacement, Memory Module: étape 3, image 1 de 1
    • Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the system board [2].

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 02/28/18

44 808 Réputation

408 tutoriels rédigés

Équipe

RampUP America, Inc. Membre de l'équipe RampUP America, Inc.

Community

42 membres

1 985 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 17

Total : 1,236