Aller au contenu principal

Dell Studio 1435 Hard Drive Replacement

Ce dont vous avez besoin

  1. Dell Studio 1435 Hard Drive Replacement, Battery: étape 1, image 1 de 1
    • Slide the battery release latch to the side.

    • Slide the battery out of the battery bay.

  2. Dell Studio 1435 Hard Drive Replacement, Base Cover: étape 2, image 1 de 1
    • Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

  3. Dell Studio 1435 Hard Drive Replacement, Hard Drive: étape 3, image 1 de 1
    • Remove the two screws on the hard drive assembly.

  4. Dell Studio 1435 Hard Drive Replacement: étape 4, image 1 de 1
    • Pull the pull tab to disconnect the hard drive assembly from the system board connector.

    • Pull the interposer to detach it from the hard drive.

    • Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.

    • Lift the hard drive cage off the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 02/28/18

44 808 Réputation

408 tutoriels rédigés

Équipe

RampUP America, Inc. Membre de l'équipe RampUP America, Inc.

Community

42 membres

1 985 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 343