Pièces

Aucune pièce nécessaire.

Slide the battery release latch to the side. {2}
  • Slide the battery release latch to the side. {2}

    • Slide the battery out of the battery bay. {1}

Ajouter un commentaire

Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
  • Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the three screws securing the hard drive assembly to the computer base.
  • Remove the three screws securing the hard drive assembly to the computer base.

    • Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.

      • Lift the hard drive assembly out of the computer base.

Ajouter un commentaire

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging .
  • NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging .

  • Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.

Ajouter un commentaire

Pull the interposer to disconnect it from the hard drive.
  • Pull the interposer to disconnect it from the hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

33 511 Réputation

412 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

857 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 12