Pièces

Aucune pièce nécessaire.

Remove the screws that secure the back cover to the computer
  • Remove the screws that secure the back cover to the computer

Ajouter un commentaire

Using a scribe, pry the edges of the back cover from all sides [1].
  • Using a scribe, pry the edges of the back cover from all sides [1].

    • Lift the back cover from the computer [2].

Ajouter un commentaire

Disconnect the battery cable from the connector on the system board [1].
  • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

      • Lift and remove the battery from the computer [3].

Ajouter un commentaire

Pull the retention clips from the memory module until it pops up.{1}
  • Pull the retention clips from the memory module until it pops up.{1}

    • Remove the memory module from the connector on the system board.{2}

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

33 511 Réputation

412 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

822 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 7