Remove the screws that secure the back cover to the computer.
  • Remove the screws that secure the back cover to the computer.

    • Pry the edges of the back cover from all sides, to release the back cover.

      • Lift the back cover from the computer.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Disconnect the battery cable from the connector on the system board [1].
  • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

      • Lift and remove the battery from the computer [3].

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Lift the plastic enclosure covering the top of the memory module compartment.
  • Lift the plastic enclosure covering the top of the memory module compartment.

    • Pull the retention clips from the memory module until it pops up.

      • Remove the memory module from the connector on the system board.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

33 511 Réputation

412 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

846 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 10