Pièces

Aucune pièce nécessaire.

Disconnect the battery cable from the system board.
  • Disconnect the battery cable from the system board.

    • Remove the screws that secure the battery to the palm-rest assembly.

      • Lift the battery, along with its cable, off the palm-rest assembly.

  • Slide and hold the power switch for about five seconds to ground the system board.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Remove the screw that secures the mSATA card to the system board.
  • Remove the screw that secures the mSATA card to the system board.

    • Slide and remove the mSATA card out of the mSATA-card connector.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnathan Hammond

Membre depuis le 28/02/2018

33 511 Réputation

412 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

822 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 10

Total : 25