Introduction

solid-state drive Replacement

Pièces

Aucune pièce nécessaire.

Disconnect the battery cable from the system board.
  • Disconnect the battery cable from the system board.

    • Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

      • Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Ajouter un commentaire

Kits de RAM Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits de RAM Mac
Obtenez plus de mémoire sur votre Mac.
Lift the battery off the palm-rest assembly.
  • Lift the battery off the palm-rest assembly.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Peel off the display cable tape from the hard-drive plate.
  • Peel off the display cable tape from the hard-drive plate.

    • Remove the two screws (M1.6x2.5) that secure the hard-drive plate to the system board.

      • Remove the hard-drive plate.

      • Slide and remove the solid-state drive from the solid-state drive slot.

  • CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Ligne d'arrivée

Johnathan Hammond

Membre depuis le 28/02/2018

33 511 Réputation

412 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

836 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 33

Total : 107