Pièces

Aucune pièce nécessaire.

Push the sliding button near the battery compartment.
  • Push the sliding button near the battery compartment.

Ajouter un commentaire

Slide the button next to the battery and lift up on the lip of the battery edge.
  • Slide the button next to the battery and lift up on the lip of the battery edge.

Ajouter un commentaire

Lift and remove the battery. Lift and remove the battery.
  • Lift and remove the battery.

Ajouter un commentaire

Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side. Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side. Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side.
  • Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side.

Ajouter un commentaire

Remove the four screws from the top of the keyboard bracket. Remove the four screws from the top of the keyboard bracket.
  • Remove the four screws from the top of the keyboard bracket.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the keyboard by sliding it forward, off of the clips, and then lifting up. Remove the keyboard by sliding it forward, off of the clips, and then lifting up. Remove the keyboard by sliding it forward, off of the clips, and then lifting up.
  • Remove the keyboard by sliding it forward, off of the clips, and then lifting up.

Ajouter un commentaire

Lift the keyboard about 2 inches up from the laptop platform. From this angle the keyboard ribbon connector can be seen and disconnected. From this angle the keyboard ribbon connector can be seen and disconnected.
  • Lift the keyboard about 2 inches up from the laptop platform.

  • From this angle the keyboard ribbon connector can be seen and disconnected.

Ajouter un commentaire

Remove 2 M2x3mm screws that are located at the bottom of the plastic bezel with a PH0 screwdriver.
  • Remove 2 M2x3mm screws that are located at the bottom of the plastic bezel with a PH0 screwdriver.

Ajouter un commentaire

Use iFixit plastic tool and a cutout of cardboard to pry out the plastic bezel around the edges of the LCD screen Use iFixit plastic tool and a cutout of cardboard to pry out the plastic bezel around the edges of the LCD screen Use iFixit plastic tool and a cutout of cardboard to pry out the plastic bezel around the edges of the LCD screen
  • Use iFixit plastic tool and a cutout of cardboard to pry out the plastic bezel around the edges of the LCD screen

Ajouter un commentaire

Disconnect the display connectors by removing them from the grooves and unplugging them. Disconnect the display connectors by removing them from the grooves and unplugging them. Disconnect the display connectors by removing them from the grooves and unplugging them.
  • Disconnect the display connectors by removing them from the grooves and unplugging them.

Ajouter un commentaire

Remove 12 M2x3mm screws along the edge of the screen frame with a PH0 screwdriver. Remove 12 M2x3mm screws along the edge of the screen frame with a PH0 screwdriver. Remove 12 M2x3mm screws along the edge of the screen frame with a PH0 screwdriver.
  • Remove 12 M2x3mm screws along the edge of the screen frame with a PH0 screwdriver.

Ajouter un commentaire

Disconnect the display connector behind the top of the screen. Disconnect the display connector behind the top of the screen.
  • Disconnect the display connector behind the top of the screen.

Ajouter un commentaire

Remove the four screws (M2x3mm) surrounding the webcam
  • Remove the four screws (M2x3mm) surrounding the webcam

Ajouter un commentaire

Lift up on the webcam bar to pull it out.
  • Lift up on the webcam bar to pull it out.

Ajouter un commentaire

Remove webcam bar and the metal tray underneath.
  • Remove webcam bar and the metal tray underneath.

  • Your webcam is now removed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Natalie King

Membre depuis le 08/02/2018

147 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 35