Réparez vos affaires Communauté Boutique

Disassembling Black and Decker BL3000S Blender Base

Introduction

As a first step to clean, maintain, or install new parts (excluding the blender blades) for the Black and Decker BL3000S the blender base must be taken apart. This guide will provide step by step instructions of how to perform this task.

Ce dont vous avez besoin

  1. Disassembling Black and Decker BL3000S Blender Base, Blender Base: étape 1, image 1 de 2 Disassembling Black and Decker BL3000S Blender Base, Blender Base: étape 1, image 2 de 2

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    Traduire

  2. Disassembling Black and Decker BL3000S Blender Base: étape 2, image 1 de 1

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    Traduire

  4. Disassembling Black and Decker BL3000S Blender Base: étape 3, image 1 de 2 Disassembling Black and Decker BL3000S Blender Base: étape 3, image 2 de 2

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    Traduire

  5. Disassembling Black and Decker BL3000S Blender Base: étape 4, image 1 de 1

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    Traduire

  6. Disassembling Black and Decker BL3000S Blender Base: étape 5, image 1 de 1

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Andrew

Membre depuis le 10/04/12

209 Réputation

4 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 6-34, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 21

30 derniers jours : 58

Total : 7,668