Pièces

Aucune pièce nécessaire.

Place the all in one computer face down on a soft, clean surface to avoid scratching the front. Press the tab on the stand cover and lift up. Press the tab on the stand cover and lift up.
  • Place the all in one computer face down on a soft, clean surface to avoid scratching the front.

  • Press the tab on the stand cover and lift up.

Ajouter un commentaire

Remove the four phillips screws that attach the stand to the computer. Tilt the stand up and out. Tilt the stand up and out.
  • Remove the four phillips screws that attach the stand to the computer.

  • Tilt the stand up and out.

Ajouter un commentaire

Starting from the optical drive, pry the back cover up with a plastic spudger. The cover is held in place by fragile plastic clips.  Careful to not break them. The cover is held in place by fragile plastic clips.  Careful to not break them.
  • Starting from the optical drive, pry the back cover up with a plastic spudger.

  • The cover is held in place by fragile plastic clips. Careful to not break them.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

19 autre(s) ont terminé cette réparation.

Tyler

Membre depuis le 19/06/2012

3 997 Réputation

18 tutoriels rédigés

Équipe

TechForce Membre de l'équipe TechForce

Business

2 membres

18 tutoriels rédigés

I took the back cover off because everytime i connected the power cable the blue light on the power cable would go out and in taking off the back cover i might find something obvious. I did not find anything obvious except for a plastic clip floating around by itself. this may be the cause to a short i am thinking. Any ideas?

kim - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 12

7 derniers jours : 91

30 derniers jours : 318

Total : 18,395