Introduction

This guide will explain how to remove the outer case of the General Electric Bagel Switch 4-Slice Toaster.

Pièces

Aucune pièce nécessaire.

Unplug the toaster from the electrical outlet.
  • Unplug the toaster from the electrical outlet.

Ajouter un commentaire

Remove the two levers and four dials by pulling them out directly towards you. Removing these components may require some force, but they will release.
  • Remove the two levers and four dials by pulling them out directly towards you.

  • Removing these components may require some force, but they will release.

Ajouter un commentaire

Look for the plastic clips on the back side of the toaster.
  • Look for the plastic clips on the back side of the toaster.

  • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

  • Now, carefully remove the toaster casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ron Gajdos

Membre depuis le 16/10/2013

307 Réputation

3 tutoriels rédigés

Équipe

University of Maryland, Team 4-4, Vijaybhaskar Fall 2013 Membre de l'équipe University of Maryland, Team 4-4, Vijaybhaskar Fall 2013

UMD-VIJAYBHASKAR-F13S4G4

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 5

7 derniers jours : 10

30 derniers jours : 19

Total : 483