Introduction

After the batteries are removed the case can be disassembled.

Pièces

Aucune pièce nécessaire.

First, apply pressure with your thumb on the top of the battery cover.
  • First, apply pressure with your thumb on the top of the battery cover.

Ajouter un commentaire

Next, pull down on the cover until it begins to slide.
  • Next, pull down on the cover until it begins to slide.

Ajouter un commentaire

Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
  • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

Ajouter un commentaire

Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.
  • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

Ajouter un commentaire

Detach back part of the case by gently lifting up.
  • Detach back part of the case by gently lifting up.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

James Tucker Dunn

Membre depuis le 18/01/2013

371 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 19-43, Regan Winter 2013 Membre de l'équipe Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 10

Total : 1,031