Introduction

You will learn how to remove the front panel of the Nerf gun. The front panel of the Furyfire is the piece that closes onto the other half of the gun to enclose the components and hold them in place. Knowing how to remove the front panel is required for you to be able to perform any other repairs on the Furyfire.

Pièces

Aucune pièce nécessaire.

Using a 00 Phillips screwdriver, remove all screws from the front panel. The screws have a length of .95 cm.
  • Using a 00 Phillips screwdriver, remove all screws from the front panel. The screws have a length of .95 cm.

Ajouter un commentaire

After the screws have been removed, gently lift the panel from the gun and set it aside.
  • After the screws have been removed, gently lift the panel from the gun and set it aside.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Cabossart

Membre depuis le 23/09/2014

1 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 11-2, Blackwell Fall 2014 Membre de l'équipe USF Tampa, Team 11-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 382