Introduction

How to get to and remove the logic board

Pièces

Aucune pièce nécessaire.

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Ajouter un commentaire

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Ajouter un commentaire

Remove the five screws as shown.
  • Remove the five screws as shown.

Ajouter un commentaire

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Ajouter un commentaire

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Ajouter un commentaire

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Ajouter un commentaire

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

doconnor

Membre depuis le 19/04/2010

25 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 10-43, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 1,340