Pièces

Aucune pièce nécessaire.

Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.
  • Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.

  • It may be helpful to set up a piece of paper to keep track of where removed screws came from.

Ajouter un commentaire

Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.
  • Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.

Ajouter un commentaire

Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver. Remove the back panel by lifting it away with your hands.
  • Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.

  • Remove the back panel by lifting it away with your hands.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Soski

Membre depuis le 18/04/2013

20 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 14-11, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 14-11, Maness Spring 2013

CPSU-MANESS-S13S14G11

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 304