Pièces

Aucune pièce nécessaire.

Remove the two 8mm Phillips#0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
  • Remove the two 8mm Phillips#0 screws on the back cover.

  • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

  • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

Ajouter un commentaire

Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
  • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

  • DO NOT detach the wire connecting the motherboard to the front cover.

Ajouter un commentaire

Grasp the white wire connector between the tabs and the socket. Wiggle the connector back and forth to remove the front cover from the motherboard.
  • Grasp the white wire connector between the tabs and the socket.

  • Wiggle the connector back and forth to remove the front cover from the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Timothy Forrest

Membre depuis le 18/04/2013

19 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 12-34, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 900