Pièces

Aucune pièce nécessaire.

Use a spudger to pry open the case of your device to reveal the inside. Use a spudger to pry open the case of your device to reveal the inside.
  • Use a spudger to pry open the case of your device to reveal the inside.

Ajouter un commentaire

Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two. Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
  • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

Ajouter un commentaire

The plastic power button is not held in by anything and should just fall right out of your device. You can now take your new plastic power button and fit it into your device. Press the button and make sure you feel it clicking correctly.
  • The plastic power button is not held in by anything and should just fall right out of your device. You can now take your new plastic power button and fit it into your device. Press the button and make sure you feel it clicking correctly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Timothy

Membre depuis le 21/01/2015

505 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 9-2, Brown Winter 2015 Membre de l'équipe USF Tampa, Team 9-2, Brown Winter 2015

USFT-BROWN-W15S9G2

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 82