Introduction

Use this guide to glue the door handle back to its original position so that it is possible to open the door.

Outils

Pièces

Aucune pièce nécessaire.

The door handle may fall off if overused or not glued properly.
  • The door handle may fall off if overused or not glued properly.

Ajouter un commentaire

Apply glue to the inside of the bracket on the handle.
  • Apply glue to the inside of the bracket on the handle.

Hi, a question for you. It is about the glue, is it a special one or with some specific active principle/ingridient ? The reason to ask is due to the heat from the owen. Thanks in advance.

Antonio - Réponse

Replace the handle in its original position on the door.
  • Replace the handle in its original position on the door.

Ajouter un commentaire

Hold firmly for a minute to allow glue to properly set.
  • Hold firmly for a minute to allow glue to properly set.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jack Cate

Membre depuis le 19/10/2012

29 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 6-35, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 755