Réparez vos affaires Communauté Boutique

Fujifilm FinePix Z1 LCD Screen Replacement

Introduction

The LCD screen on the Fujifilm FinePix Z1 is durable but in unfortunate events can still be damaged. If the screen has had water damaged or has been cracked in some way, this guide will aid in removing the screen and replacing it with a new one.

Ce dont vous avez besoin

  1. Fujifilm FinePix Z1 LCD Screen Replacement, LCD Screen: étape 1, image 1 de 1

    • Ensure that the camera is charged and not on PowerSave mode.

    • If the camera is charged and on, a faulty LCD Screen could be caused by a scratch or water damage. Also, trauma to the camera could cause the screen to shatter. In any of these cases, the screen will need to be replaced.

    • Make sure that the orange thin cable is appropriately attached.

    Modifier

  2. Fujifilm FinePix Z1 LCD Screen Replacement: étape 2, image 1 de 3 Fujifilm FinePix Z1 LCD Screen Replacement: étape 2, image 2 de 3 Fujifilm FinePix Z1 LCD Screen Replacement: étape 2, image 3 de 3

    • Open the camera by removing the 5 external 4.0 mm screws with the 1.0 flathead.

    Modifier

  4. Fujifilm FinePix Z1 LCD Screen Replacement: étape 3, image 1 de 2 Fujifilm FinePix Z1 LCD Screen Replacement: étape 3, image 2 de 2

    • Gently pull the components apart.

    • Remove the 2.0mm screw to the left of the SD card.

    • The LCD screen is located on the back of the circuit board and can be accessed after removing the internal components.

    Modifier

  5. Fujifilm FinePix Z1 LCD Screen Replacement: étape 4, image 1 de 3 Fujifilm FinePix Z1 LCD Screen Replacement: étape 4, image 2 de 3 Fujifilm FinePix Z1 LCD Screen Replacement: étape 4, image 3 de 3

    • Use the PH00 to pry open the display screen of the camera.

    • Expose the display screen and make sure the cable connecting the screen and the camera are separated. Remember where the cable connection is located to attach the replacement screen.

    • Use the How to Solder and Desolder Connections Guide to remove the screen from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Carra

Membre depuis le 01/30/18

533 Réputation

4 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

Baylor, Team S2-G4, Johnson Spring 2018 Membre de l'équipe Baylor, Team S2-G4, Johnson Spring 2018

BU-JOHNSON-S18S2G4

3 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 11

Total : 277