Introduction

The lens filter set is responsible for the correct color filtering of the pictures taken. To get to the filter set, remove the electrowind tape and remove the screws holding the lens filter set in place.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Ajouter un commentaire

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Ajouter un commentaire

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Ajouter un commentaire

Separate the front and back casing using the spudger. Gently pull apart the two casings. Pull the back casing away from the camera.
  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Ajouter un commentaire

Remove electrowind strip from font cover. The front cover does not have to be separated from the device for this step or the next ones.
  • Remove electrowind strip from font cover.

    • The front cover does not have to be separated from the device for this step or the next ones.

Ajouter un commentaire

Remove lens data cable by gently pulling it out.
  • Remove lens data cable by gently pulling it out.

Ajouter un commentaire

Remove lens filter.
  • Remove lens filter.

    • There are multiple square pieces, so be sure to remove them all.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sarah Looper

Membre depuis le 11/03/2013

76 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 13-4, Benson Spring 2013 Membre de l'équipe Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 455