Introduction

This Guide will walk you through replacing your keyboard on a HP 15-ac121dx Laptop. This is not an easy process, so you will want to pull out your plastic prying tools and Philips J00 Screw Driver and follow the instructions closely.

Remove all external devices from the computer.
  • Remove all external devices from the computer.

  • Remove the charging cord from the computer.

Ajouter un commentaire

Turn off the computer by holding the power button.
  • Turn off the computer by holding the power button.

Ajouter un commentaire

To remove the battery, slide the left slider on the back to the unlocked position. To remove the battery, slide the left slider on the back to the unlocked position.
  • To remove the battery, slide the left slider on the back to the unlocked position.

Ajouter un commentaire

Push the right slider inwards. Remove the battery out by pulling straight out and to the right.
  • Push the right slider inwards.

  • Remove the battery out by pulling straight out and to the right.

Ajouter un commentaire

Locate the CD Compartment panel and gently slide it out. Locate the CD Compartment panel and gently slide it out. Locate the CD Compartment panel and gently slide it out.
  • Locate the CD Compartment panel and gently slide it out.

Ajouter un commentaire

Remove the back of the laptop by unscrewing the screws shown.
  • Remove the back of the laptop by unscrewing the screws shown.

Ajouter un commentaire

Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off. Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off. Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off.
  • Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Locate the CD Compartment as shown and gently slide it out. Locate the CD Compartment as shown and gently slide it out. Locate the CD Compartment as shown and gently slide it out.
  • Locate the CD Compartment as shown and gently slide it out.

Ajouter un commentaire

Locate the Fan as shown. Pull out the black cable, with four wires attached from its port. Pull out the black cable, with four wires attached from its port.
  • Locate the Fan as shown.

  • Pull out the black cable, with four wires attached from its port.

Ajouter un commentaire

Pull out the white cable wire from its port. Pull out the white cable wire from its port.
  • Pull out the white cable wire from its port.

Ajouter un commentaire

Remove fan. Remove fan.
  • Remove fan.

Ajouter un commentaire

Remove the 3mm screws.
  • Remove the 3mm screws.

  • Remove the 9mm screw.

Ajouter un commentaire

Locate the four ribbon clips. Lift the grey part of the ribbon clips.
  • Locate the four ribbon clips.

  • Lift the grey part of the ribbon clips.

  • Pull the ribbon cable out and repeat this step for all four ribbon cables.

Ajouter un commentaire

Pull out the white cable (contains red and white cable attached to a black support) with wires from its port. Pull out the white cable (contains red and white cable attached to a black support) with wires from its port.
  • Pull out the white cable (contains red and white cable attached to a black support) with wires from its port.

Ajouter un commentaire

Remove the motherboard.
  • Remove the motherboard.

Ajouter un commentaire

Remove the CPU. Remove the CPU.
  • Remove the CPU.

Ajouter un commentaire

Lift up the cable port and place it to the side but do not remove completely from the laptop. Lift up the cable port and place it to the side but do not remove completely from the laptop.
  • Lift up the cable port and place it to the side but do not remove completely from the laptop.

Ajouter un commentaire

Remove the VENDOR component. Remove the VENDOR component. Remove the VENDOR component.
  • Remove the VENDOR component.

Ajouter un commentaire

Using a plastic prying tools, remove the grey metal plate. Using a plastic prying tools, remove the grey metal plate.
  • Using a plastic prying tools, remove the grey metal plate.

Ajouter un commentaire

Locate the damaged keyboard and lift up with the prying tool to remove. Locate the damaged keyboard and lift up with the prying tool to remove. Locate the damaged keyboard and lift up with the prying tool to remove.
  • Locate the damaged keyboard and lift up with the prying tool to remove.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Onose Aigbe

Membre depuis le 30/01/2018

387 Réputation

3 tutoriels rédigés

Équipe

Baylor, Team S1-G2, Johnson Spring 2018 Membre de l'équipe Baylor, Team S1-G2, Johnson Spring 2018

BU-JOHNSON-S18S1G2

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 26

Total : 143