Introduction

This guide will provide simple, easy to follow instructions for replacing the Hard Drive Disk for HP-15ay014dx

Disconnect device from power source and power down.
  • Disconnect device from power source and power down.

Ajouter un commentaire

With the device turned upside down, use your index fingers to push the battery latches in towards each other.
  • With the device turned upside down, use your index fingers to push the battery latches in towards each other.

Ajouter un commentaire

The latch on your left will stay at the inward position, while the latch on the right will slide back out.
  • The latch on your left will stay at the inward position, while the latch on the right will slide back out.

  • Gently grasp the battery and pull it back away from the device and yourself.

Ajouter un commentaire

Close the laptop and lay it down with the bottom facing up.
  • Close the laptop and lay it down with the bottom facing up.

  • Using a size #00 Phillips screw drive remove the screw holding in the optical drive.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Grip the optical drive and gently pull it out.
  • Grip the optical drive and gently pull it out.

Ajouter un commentaire

Remove the highlighted screws holding the body of the laptop together with a size #00 Phillips screwdriver. Remove the highlighted screws holding the body of the laptop together with a size #00 Phillips screwdriver.
  • Remove the highlighted screws holding the body of the laptop together with a size #00 Phillips screwdriver.

Ajouter un commentaire

Using the spudger, push in the tabs in the back that hold the body together. Carefully pry the body apart by working the spudger around the body. Pull the back cover off. Pull the back cover off.
  • Using the spudger, push in the tabs in the back that hold the body together. Carefully pry the body apart by working the spudger around the body.

  • Pull the back cover off.

Ajouter un commentaire

Pry up on the clamp holding the SATA power ribbon using the plastic opening tool. Pull out the SATA power ribbon using the tweezers. Pull out the SATA power ribbon using the tweezers.
  • Pry up on the clamp holding the SATA power ribbon using the plastic opening tool.

  • Pull out the SATA power ribbon using the tweezers.

Ajouter un commentaire

Remove the highlighted screws holding the hard drive to the body using the Philips #00 screwdriver. Remove the hard drive.
  • Remove the highlighted screws holding the hard drive to the body using the Philips #00 screwdriver.

  • Remove the hard drive.

Ajouter un commentaire

Remove the 4 screws holding the hard drive to the hard drive cage using the Philips #00 screwdriver.
  • Remove the 4 screws holding the hard drive to the hard drive cage using the Philips #00 screwdriver.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jimmy Huynh

Membre depuis le 26/09/2017

101 Réputation

1 tutoriel rédigé

Équipe

Washington State, Team S1-G4, Phelps-Hillen Fall 2017 Membre de l'équipe Washington State, Team S1-G4, Phelps-Hillen Fall 2017

WSU-PHELPS-HILLEN-F17S1G4

6 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 13

30 derniers jours : 43

Total : 266