Introduction

This guide will walk you through the steps required to remove, and thus replace, the keyboard in a Compaq Presario V5303NR. This would be a necessary procedure if the keyboard should be damaged or otherwise rendered inoperable. Following this guide to the penultimate step should also provide access to the keyboard's components, should it need to be maintained or cleaned.

Pièces

Aucune pièce nécessaire.

Turn laptop bottom-side up. Push the battery latch to the left position to unlock the battery. Lift the battery out of its socket.
  • Turn laptop bottom-side up.

  • Push the battery latch to the left position to unlock the battery.

  • Lift the battery out of its socket.

  • Failure to unplug the computer and remove the battery can result in electrical discharges on contact with the computer's components. This can damage the computer or even hurt the user.

Ajouter un commentaire

Remove the 5 mm and 4 mm screws shown, represented in red and orange, respectively,  using a Phillips #0 Screwdriver. Keep all different types of screw separate from one another; they are different sizes, and cannot fit into the other's spaces upon reassembly.
  • Remove the 5 mm and 4 mm screws shown, represented in red and orange, respectively, using a Phillips #0 Screwdriver.

  • Keep all different types of screw separate from one another; they are different sizes, and cannot fit into the other's spaces upon reassembly.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Turn the laptop right-side up.
  • Turn the laptop right-side up.

  • Carefully open the laptop as far as it can.

Ajouter un commentaire

Insert the metal spudger in the space between the switch cover and the  F1, F5, F11 and Insert keys. Use the spudger to carefully pry the cover plate away from the keyboard and laptop at the aforementioned locations. Remove the cover plate.
  • Insert the metal spudger in the space between the switch cover and the F1, F5, F11 and Insert keys.

  • Use the spudger to carefully pry the cover plate away from the keyboard and laptop at the aforementioned locations. Remove the cover plate.

  • If it is possible to do so, it is advised to use a plastic spudger instead of a metal one. The metal spudger can damage the computer's internal components, but the plastic one may be too thick to fit in the gap.

Ajouter un commentaire

Use a Phillips #0 Screwdriver to remove the 4 4mm screws shown in the second picture. As per before, keep them separated from the screws removed in step 2. Carefully lift up the section of the keyboard closest to the screen. Slowly rotate it downwards until it is resting on top of the touch pad. Carefully lift up the section of the keyboard closest to the screen. Slowly rotate it downwards until it is resting on top of the touch pad.
  • Use a Phillips #0 Screwdriver to remove the 4 4mm screws shown in the second picture. As per before, keep them separated from the screws removed in step 2.

  • Carefully lift up the section of the keyboard closest to the screen. Slowly rotate it downwards until it is resting on top of the touch pad.

Ajouter un commentaire

Using your fingers, carefully pull the ribbon cable connecting the keyboard and laptop toward the hinge. Continue until connecting cable is unplugged. Remove keyboard from laptop.
  • Using your fingers, carefully pull the ribbon cable connecting the keyboard and laptop toward the hinge. Continue until connecting cable is unplugged.

  • Remove keyboard from laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris Obesky

Membre depuis le 16/03/2018

557 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S4-G3, Covino Spring 2018 Membre de l'équipe UMass Dartmouth, Team S4-G3, Covino Spring 2018

UMASSD-COVINO-S18S4G3

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 43