Introduction

This guide will show how to disassemble the laptop and get to the display assembly to replace LCD screen.

Make sure laptop is shutdown and unplugged from power adapter.
  • Make sure laptop is shutdown and unplugged from power adapter.

  • Slide the battery release latch to the left and remove the battery.

Ajouter un commentaire

Unscrew the five screws holding the bottom cover for accessing the RAM, hard drive and wifi card. Five Phillips #1 When removing the cover, start from the top edge and lift up.
  • Unscrew the five screws holding the bottom cover for accessing the RAM, hard drive and wifi card.

    • Five Phillips #1

  • When removing the cover, start from the top edge and lift up.

  • Remove cover.

Ajouter un commentaire

Remove the four screws holding the hard drive. Four Phillips #1
  • Remove the four screws holding the hard drive.

    • Four Phillips #1

Ajouter un commentaire

Unplug the SATA connection using the black pull tab. Remove hard drive
  • Unplug the SATA connection using the black pull tab.

  • Remove hard drive

Ajouter un commentaire

Remove RAM by pushing the locking clips outwards.
  • Remove RAM by pushing the locking clips outwards.

Ajouter un commentaire

Use the edge of a plastic opening tool to pry the wifi antenna cable up from its socket on the wireless card. Remove two screws from wireless card. Two Phillips #1
  • Use the edge of a plastic opening tool to pry the wifi antenna cable up from its socket on the wireless card.

  • Remove two screws from wireless card.

    • Two Phillips #1

Ajouter un commentaire

Remove the one screw holding the optical drive. One Phillips #1 Use a spudger to push on the metal tab below where the screw was. This should disconnect the optical drive from the SATA connector.
  • Remove the one screw holding the optical drive.

    • One Phillips #1

  • Use a spudger to push on the metal tab below where the screw was. This should disconnect the optical drive from the SATA connector.

  • Remove optical drive.

Ajouter un commentaire

Remove the 26 screws on the bottom. 20 Phillips #1 Three Phillips #0
  • Remove the 26 screws on the bottom.

    • 20 Phillips #1

    • Three Phillips #0

    • Three Phillips #00

Ajouter un commentaire

To the left of the battery connector is a keyboard release latch. Use a spudger to release the keyboard. You may have to open the laptop some to keep the keyboard from re-latching. Once freed, lift the keyboard up from the top.
  • To the left of the battery connector is a keyboard release latch. Use a spudger to release the keyboard.

    • You may have to open the laptop some to keep the keyboard from re-latching.

  • Once freed, lift the keyboard up from the top.

    • Be careful not to damage or tear the ribbon cable.

  • Use the edge of a plastic opening tool to carefully flip up the retaining flap on the keyboard ZIF socket.

  • Remove keyboard.

Ajouter un commentaire

Remove the two screws. Two Phillips #1 Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the three ZIF sockets.
  • Remove the two screws.

    • Two Phillips #1

  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the three ZIF sockets.

Ajouter un commentaire

Starting on the left side, use a spudger to pry the cover up. Work your way around to the right side. Remove cover. Remove cover.
  • Starting on the left side, use a spudger to pry the cover up. Work your way around to the right side.

  • Remove cover.

Ajouter un commentaire

Remove the screw on the left side holding the lid hinge. One Phillips #1
  • Remove the screw on the left side holding the lid hinge.

    • One Phillips #1

  • Use the black pull tab to remove the LCD connector.

Ajouter un commentaire

Remove the screw on the right side holding the lid hinge. One Phillips #1 Use a spudger to disconnect the speaker wire.
  • Remove the screw on the right side holding the lid hinge.

    • One Phillips #1

  • Use a spudger to disconnect the speaker wire.

  • Carefully pull the wifi antenna wires out from the bottom case.

  • Remove lid.

Ajouter un commentaire

Using a metal spudger remove the two hinge covers. Use a metal spudger to remove the two screw covers. Use a metal spudger to remove the two screw covers.
  • Using a metal spudger remove the two hinge covers.

  • Use a metal spudger to remove the two screw covers.

Ajouter un commentaire

Remove the two Phillips #1 screws that were under the covers. Starting on the left side, use a spudger to pry the bezel up. Work your way around and remove the bezel.
  • Remove the two Phillips #1 screws that were under the covers.

  • Starting on the left side, use a spudger to pry the bezel up.

  • Work your way around and remove the bezel.

Ajouter un commentaire

Remove the eight screws holding the LCD panel. Eight Phillips #1 Use a spudger to disconnect the webcam connector.
  • Remove the eight screws holding the LCD panel.

    • Eight Phillips #1

  • Use a spudger to disconnect the webcam connector.

  • Lift up the LCD panel.

    • The webcam wire is attached to the back of the panel. Carefully peel it off the panel.

Ajouter un commentaire

Use a sudger to disconnect the wire from the LCD panel.
  • Use a sudger to disconnect the wire from the LCD panel.

  • Remove LCD panel.

Ajouter un commentaire

Remove the four screws (two on each side) holding the hinges on the sides. Four Phillips #1 (two on each side) Remove the hinges.
  • Remove the four screws (two on each side) holding the hinges on the sides.

    • Four Phillips #1 (two on each side)

  • Remove the hinges.

Ajouter un commentaire

LCD remains.
  • LCD remains.

  • To reassemble, follow these instructions in reverse order.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autre(s) ont terminé cette réparation.

Patrick

Membre depuis le 30/03/2012

431 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 14

30 derniers jours : 40

Total : 6,095