Introduction

The screen is one of the most commonly damaged components of the HP Elite x2 1012 G2. Additionally, this guide is an important prerequisite to all other repairs on this device. Thankfully, removal and repair of the screen is relatively easy.

Make sure the device is turned off before starting.
  • Make sure the device is turned off before starting.

  • Orient the device so the back is facing you, with the kickstand up.

Ajouter un commentaire

Remove the six 3mm Torx T5 screws underneath the kickstand. Remove the six 3mm Torx T5 screws underneath the kickstand. Remove the six 3mm Torx T5 screws underneath the kickstand.
  • Remove the six 3mm Torx T5 screws underneath the kickstand.

Ajouter un commentaire

Turn the device over so the screen is facing you. Place a suction cup firmly onto a corner of the screen.
  • Turn the device over so the screen is facing you.

  • Place a suction cup firmly onto a corner of the screen.

  • Lift up gently until you see the screen separate from the casing.

  • Repeat this process for all four corners.

Ajouter un commentaire

Lift the screen up and off of the device.
  • Lift the screen up and off of the device.

  • Pry each corner up first, otherwise you may damage or crack the screen.

Ajouter un commentaire

Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently. Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently. Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.
  • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

Ajouter un commentaire

Remove the screen by gently lifting it off of the device. Remove the screen by gently lifting it off of the device.
  • Remove the screen by gently lifting it off of the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Noah Stapp

Membre depuis le 18/04/2018

374 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S18-G5, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 12

30 derniers jours : 37

Total : 52