Introduction

This guide is to help you replace your fan on the HP Envy Sleekbook m6-k010dx.

Pièces

Aucune pièce nécessaire.

Remove the four 9mm Phillips #00 screws.
  • Remove the four 9mm Phillips #00 screws.

  • Remove the eight 9mm Phillips #00 screws.

Ajouter un commentaire

Use the plastic opening tool and your hands to remove the bottom cover. Use the plastic opening tool and your hands to remove the bottom cover.
  • Use the plastic opening tool and your hands to remove the bottom cover.

Ajouter un commentaire

Disconnect the battery power cable from the motherboard. Remove the six 6mm Phillips #00 screws from the battery.
  • Disconnect the battery power cable from the motherboard.

  • Remove the six 6mm Phillips #00 screws from the battery.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Lift the battery out of the laptop. Lift the battery out of the laptop.
  • Lift the battery out of the laptop.

Ajouter un commentaire

Remove two 3mm Phillips #00 screws from the fan.
  • Remove two 3mm Phillips #00 screws from the fan.

Ajouter un commentaire

Disconnect the fan cable by pulling it out of the motherboard socket. Disconnect the fan cable by pulling it out of the motherboard socket.
  • Disconnect the fan cable by pulling it out of the motherboard socket.

Ajouter un commentaire

Lift the fan upwards to remove it from the computer.
  • Lift the fan upwards to remove it from the computer.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ana Novo

Membre depuis le 14/02/2018

305 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S1-G4, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 68