Introduction

If you have noticed that your computer is no longer booting up and you have come to the conclusion that the hard drive is the problem, this guide will walk you through the sets to replace the hard drive. You will first remove the battery and then the hard drive. Using the tools suggested, you should have no problem removing the hard drive.

Make sure the laptop is off and unplugged before starting.
  • Make sure the laptop is off and unplugged before starting.

  • Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

Ajouter un commentaire

Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel. Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.
  • Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Ajouter un commentaire

Using the plastic opening tool, remove the back cover of the laptop. It is recommended that you start with a corner and run the tool throughout the edges of the cover.
  • Using the plastic opening tool, remove the back cover of the laptop.

  • It is recommended that you start with a corner and run the tool throughout the edges of the cover.

  • Be sure not to bend the cover by applying too much force.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place. Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.
  • Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.

Ajouter un commentaire

Carefully disconnect the cable connecting the top of the battery and remove the battery. Carefully disconnect the cable connecting the top of the battery and remove the battery. Carefully disconnect the cable connecting the top of the battery and remove the battery.
  • Carefully disconnect the cable connecting the top of the battery and remove the battery.

Ajouter un commentaire

The hard drive is located at the lower left area of the motherboard. Using the spudger, lift the white latch holding the hard drive cable in place. Using the spudger, lift the white latch holding the hard drive cable in place.
  • The hard drive is located at the lower left area of the motherboard.

  • Using the spudger, lift the white latch holding the hard drive cable in place.

Ajouter un commentaire

Using the opening tool, lift the hard drive out of the motherboard.
  • Using the opening tool, lift the hard drive out of the motherboard.

Ajouter un commentaire

Remove the hard drive cable from the hard drive. Remove the hard drive cable from the hard drive.
  • Remove the hard drive cable from the hard drive.

Ajouter un commentaire

Pull off the plastic wedges on both sides of the hard drive. Pull off the plastic wedges on both sides of the hard drive.
  • Pull off the plastic wedges on both sides of the hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mohammad Gardezi

Membre depuis le 17/10/2017

649 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team S13-G3, Cagle Fall 2017 Membre de l'équipe USF Tampa, Team S13-G3, Cagle Fall 2017

USFT-CAGLE-F17S13G3

2 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 30

30 derniers jours : 132

Total : 683