Introduction

This guide will show you how to successfully remove the wireless card from the laptop. You will need the screwdriver listed in the tools section.

Pièces

Aucune pièce nécessaire.

Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.
  • Step 1 – Battery: Locate the battery release slider on the bottom of the laptop and move it in the direction of the arrow to the unlock position.

  • The yellow highlighted edge of the battery should pop up slightly when the switch is moved

Ajouter un commentaire

Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer. Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.
  • Step 2: Using the edge of the battery that has popped up, lift the battery out of the computer.

Ajouter un commentaire

With the laptop upside down, locate the three screws on the wireless card cover and unscrew the screws.
  • With the laptop upside down, locate the three screws on the wireless card cover and unscrew the screws.

  • All three screws will have a 3.5 mm diameter head.

  • Two of the screws will be silver, 7mm in length, and will stay attached to the cover.

  • One screw will be black, 13mm in length, and will separate from the cover. Set this screw aside.

Ajouter un commentaire

Grab one of the edges to the cover and lift up (towards you). Set the cover to the side.
  • Grab one of the edges to the cover and lift up (towards you).

  • Set the cover to the side.

  • The wireless card will now be exposed.

Ajouter un commentaire

Using your hand, pull the black and white antenna wires upwards. This will disconnect the antenna wires from the card. This will disconnect the antenna wires from the card.
  • Using your hand, pull the black and white antenna wires upwards.

  • This will disconnect the antenna wires from the card.

Ajouter un commentaire

Locate the two black screws connecting the wireless card to the laptop. They will have a 3.5 mm diameter head and be 4mm long. Remove the screws. Once the screws are removed, the wireless card will pop up.
  • Locate the two black screws connecting the wireless card to the laptop. They will have a 3.5 mm diameter head and be 4mm long. Remove the screws.

  • Once the screws are removed, the wireless card will pop up.

Ajouter un commentaire

Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop. Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop.
  • Grab the sides of the wireless card and pull it up and to the left to disconnect from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brandon Baldovin

Membre depuis le 30/09/2013

482 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 14-10, Forte Fall 2013 Membre de l'équipe Cal Poly, Team 14-10, Forte Fall 2013

CPSU-FORTE-F13S14G10

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 15

Total : 1,103