Introduction

How to remove the Wi-Fi Card

Pièces

Aucune pièce nécessaire.

Begin by turning the laptop over so that you can see the bottom of the computer.
  • Begin by turning the laptop over so that you can see the bottom of the computer.

Ajouter un commentaire

Slide the battery release switch to the right while simultaneously lifting up the battery.
  • Slide the battery release switch to the right while simultaneously lifting up the battery.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Unscrew the 2 screws from the plate that cover the Wi-Fi card. Remove the cover.
  • Unscrew the 2 screws from the plate that cover the Wi-Fi card.

  • Remove the cover.

Ajouter un commentaire

Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card. For reassembly, note where the black and white cables connect to the card.
  • Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card.

    • For reassembly, note where the black and white cables connect to the card.

  • Release the Wi-Fi card from the laptop by pressing the metal hinges on either end of it.

  • Gently remove the card from laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Shantel

Membre depuis le 20/04/2010

470 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 30-37, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 30-37, Garner Spring 2010

CPSU-GARNER-S10S30G37

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 5,034