Turn off down the computer, and unplug the computer from all external power sources.
  • Turn off down the computer, and unplug the computer from all external power sources.

  • Shut the screen, and lay the computer face-down on a flat, sturdy surface. Orient the computer to match the image.

  • Locate the battery release switch, as indicated in the image. Sliding this switch from right to left will release the battery.

  • Remove the battery.

Ajouter un commentaire

Remove the two 11.0mm screws at the corners on either side of the battery compartment. (shown by the red circles)
  • Remove the two 11.0mm screws at the corners on either side of the battery compartment. (shown by the red circles)

  • Remove the three 6.0mm screws. (shown by the blue circles)

  • Remove the two silver 5.0mm screws. (shown by the yellow circles)

  • Remove the 6.0mm screw in the middle of the battery compartment. (shown by the teal circle)

Ajouter un commentaire

Lift plastic covering strip gently at the corner to separate the plastic it from the keyboard area. Slide a plastic separator tool along the strip and lift off to remove it. Slide a plastic separator tool along the strip and lift off to remove it.
  • Lift plastic covering strip gently at the corner to separate the plastic it from the keyboard area.

  • Slide a plastic separator tool along the strip and lift off to remove it.

Ajouter un commentaire

Using tweezers, remove the (8) silicone covers over the screws of the screen's frame. The image still shows the plastic strip that was removed in the last step Remove the (8) now-exposed screws.
  • Using tweezers, remove the (8) silicone covers over the screws of the screen's frame.

    • The image still shows the plastic strip that was removed in the last step

  • Remove the (8) now-exposed screws.

Ajouter un commentaire

Using the plastic separator, make your way up from the bottom, separating the screen's frame off. You may need to finagle the locking tab slightly in order to pull the frame away from it You may need to finagle the locking tab slightly in order to pull the frame away from it
  • Using the plastic separator, make your way up from the bottom, separating the screen's frame off.

    • You may need to finagle the locking tab slightly in order to pull the frame away from it

Ajouter un commentaire

With frame removed, the locking assembly is visible Using tweezers, pull the spring off the hook, and the locking assembly will pull down and off with little effort Be sure not to drop the spring behind the screen while removing it!
  • With frame removed, the locking assembly is visible

  • Using tweezers, pull the spring off the hook, and the locking assembly will pull down and off with little effort

    • Be sure not to drop the spring behind the screen while removing it!

Ajouter un commentaire

Congratulations! You're ready to install the new assembly and reassemble your laptop!
  • Congratulations! You're ready to install the new assembly and reassemble your laptop!

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Thomas Leman

Membre depuis le 11/03/2014

234 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team 4-5, Calaway Spring 2014 Membre de l'équipe UMass Dartmouth, Team 4-5, Calaway Spring 2014

UMASSD-CALAWAY-S14S4G5

4 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 482